������ � ����������� ��� ��������� ���������
- ���������� ������ ��� ��������� Citizen RS-232 DB9F (�)-DB25M (�) for Citizen printers only
- ���������� CoStar/DYMO LabelWriter RS-232 Cable Used on the DYMO/CoStar LabelWriter thermal printers that connect through RS-232.
- Gyro Point II Base station PS/2 ����� ������ PS/2 (6 pin mini Din) - Gyro Point II (6 pin RJ12)
- ���������� HP printer serial cable Serial cable between Intel Netport ExpressXL and HP LaserJet printer
- ���������� LS 2208 Scaner to PS/2 connector adapter for connecting barcode scanner to ps/2 interface
- ���������� LSC CodeLink cable used to upload software from PC to LSC lighting product
- ���������� Mac to HP48 cable
- ���������� Panasonic KX-TD1232 (DSHS) - PC cable RS-232C cable for connect PBX Panasonic KX-TD1232 (DSHS) with PC
- ���������� RS-422 ADAT sync cable Alesis ADAT synchronization cable
- ���������� White Console to PA-RISC computers cable
| Net |
- ���������� ADC Pairgain 310F and 320F console used to connect PC to ADSL modem console
- ���������� Adtran CSUs RJ45 to DB9 cable e.g. works with Adtran MX2800
- ���������� Allied Telesyn/Network iQ1000 router serial port cable serial port for configuring router
- ���������� Baytech RPC-3 to DB9 serial port adapter Baytech RPC-3 RJ45 to DB9 null modem serial cable
- ���������� Console cable for NetServer8/16
- ���������� Intel 100FX switch console cable
- ���������� RAD console cable (25 pin) Console cable for configuring RAD´s devices (e.g. FPS-8). This is cable supplied with RAD FPS-8 switch. The pinout of the cable in manual is wrong. Provided here is a real pinout.
- ���������� RAD console cable (9 pin) Console cable for configuring RAD´s devices (e.g. FPS-8). This is non-standard cable, because RAD FPS-8 switch is supplied with DB-25 - RJ-45 cable. Most of modern computers have no 25 pin COM-ports.
| UPS |
- ���������� APC BackUPS CS/ES smart signalling cable original 940-0128A and analogue of the 940-0128A
- ���������� APC BackUPS ES (old) cable wiring APC part # 940-0119A
- ���������� APC BackUPS Office (old) cable APC Part# 940-0119A
- ���������� APC BackUPS Pro PNP cable APC part # 940-0095A
- ���������� APC BackUPS Pro cable APC Part# 940-0095B. Should work with APC PowerChute Pro software.
- ���������� APC BackUPS XS1000, BX-1000 and some others cable wiring APC part# 940-0128D
- ���������� APC BackUPS dumb cable (on-battery only) APC Part# - 940-0023A
- ���������� APC Dumb UPS cable (simple) APC Part# 940-0020 (grey cable). Should work with APC PowerChute Plus software.
- ���������� APC Smart UPS cable APC Part # 940-0024C (black cable). Should work with APC PowerChute Plus, PowerChute V/S, PowerChute Pro software
- APC USB ����� ������ APC part# 940-0127B
- ���������� APC rack mount Smart-signalling DB9 cable part #940-1524C. Same usage as 024C but the length is 5meter
- ���������� Ablerex Troy 600 UPS cable Shutdown Cable with UPSee software. Should work with Troy 800
- ���������� Belkin F6H500 UPS cable UPS to PC shutdown cable
- ���������� Invertomatic-Victron (IMV) UPS intelligent (serial communication) cable part# VIC-23/2. Works with PowerFLAG software
- ���������� Megatech M2501 and M2603 UPS cables Types I, II Used for connecting Megatech inteligent UPS (type I) or smart UPS (type II) to PC
- ���������� PowerCom King UPS cable
- ���������� Sendon UPS-500 dumb cable Part# M2501. Should work with RUPS for DOS/Windows software
- ���������� Tripp-lite OmniPro-450 (675) PowerAlert Cable Part# 73-0724 (BC, Internet Office, OmniSmart UPS). Should work with PowerAlert software.
- ���������� Tripp-lite OmniPro-450 (675) WinNT Cable Should work with Windows NT UPS Service
- ���������� Tripp-lite SmartPro Cable Part# 73-0743 (SmartPro UPS). Should work with PowerAlert software.
| ��� Net UPS |
|
-������ ��� ������� -������ ����������� |