RS-422 ADAT sync cable

This pinout is for a "sony" type 422 control of an alesis box, in addition to the "ADAT SYNC".
The source "ADAT SYNC" is straight through, but it is not a "422" pinout. There are four pairs of diffrering signals. Word clock, time code, control data, response data. pin 1-shields, pins 2&6 paired, pins 3&7 paired, pins 4&8 paired, pins 5&9 paired.

The interface connector is a 9-pin D-subminiature female connector. The pin assignment for the CONTROLLER and DEVICE is as shown in the following table.

Controller Pin name	Controller Pin	Direction	Device Pin	Device Pin name	Description
Ground	1		1	Ground
Receive A	2		2	Transmit A
Transmit B	3		3	Receive B
Transmit Common	4		4	Receive Common
Spare	5		5	Spare
Receive Common	6		6	Transmit Common
Receive B	7		7	Transmit B
Transmit A	8		8	Receive A
Ground	9		9	Ground