Cisco Console port (at Catalyst 5000 Series Switch) pinout

serial interface

8 pin RJ45 (8P8C) female connector layout

8 pin RJ45 (8P8C) female connector
at the Cisco routers

Console Port		Console device
Pin	+Signal	Connect to
1	looped to 8
2	(DTR)	DSR
3	(RxD)	TxD
4	(GND)	GND
5	(GND)	GND
6	(TxD)	RxD
7	(DSR)	DTR
8	looped to 1

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

8 pin RJ45 (8P8C) male connector diagram

8 pin RJ45 (8P8C) male connector
at the cable

Pinouts.ru > RS-232 and other serial ports and interfaces pinouts listing > Pinout of Cisco Console port (at Catalyst 5000 Series Switch) and layout of 8 pin RJ45 (8P8C) female connector and 8 pin RJ45 (8P8C) male connector	Document status:	unknown
Source(s) of this and additional information: comp.sys.cbm General FAQ v3.1 Part 7, from Hardware Book	0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
11843 hits since March 4, 2005