![]() |
Dell Dimension 8100 (and may be others) power connectors pinout |
connector or cable wiring scheme |
The following figure shows the P1 (24 pin) DC power connector.
Pin 5 � PWRGOOD is a status signal generated by the power supply to notify the computer that the DC operating voltages are within the ranges required for proper computer operation. Pin 13 � PSON# is activated by pressing and releasing the power button while the power supply is in standby mode. Activating PSON# connects the power supply�s PSON# input to ground, thereby switching the power supply to full-on condition. Pin 21 (TFSC) may be not used (n/c). In 20 PIN ATX <--> DELL 24 PIN+ 16PIN connectors adapter WHITE(-5V) 20 PIN ATX may be left unconnected. The following figure shows the P2 (16 pin) DC power connector.
Dell Precision 610 (and maybe other Dell workstations of similar age) also uses a very similar 24pin P1 connector, but according to the service manual, pins 17-24 are -5 VDC (white), -5 VDC (white), +5 VDC (red), +5 VDC (red), +5 VDC (red), TFSC (brown), +3.3 VDC (blue/white) and common (black) respectively, instead of N/C, +5 VDC (red), +5 VDC (red), +5 VDC (red), TFSC (brown), +5 VDC (red) and +3.3 VDC (blue/white)? | ![]() 16 pin Dell dimension PSU connector connector | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pinouts.ru > ATX, BTX, WTX and other power supply cables connectors pinouts listing > Pinout of Dell Dimension 8100 (and may be others) power connectors and layout of 24 pin MOLEX 39-01-2240 or equivalent connector and 16 pin Dell dimension PSU connector connector |
correct | |
Source(s) of this and additional information: support.dell.com | 5 reports | |
Last updated at Sat Oct 13 2007. Submit additions or corrections for this document. | Is this document correct or incorrect? What is your opinion? |