Palm Pilot cradle cable pinout

PDA connectors and cables

9 pin D-SUB female connector
at the computer

DB9F	Signal	Cradle	Signal
1	CD
2	RXD	6	TXD
3	TXD	8	RXD
4	DTR
5	GND	1	GND
6	DSR	10	Gen.Purpose Output
7	RTS	5	CTS
8	CTS	7	RTS
9	RI
Shield	10nF capacitor to ground
		4	HotSync switch
		9	HotSync switch live (to 3.3V via 330 ohms)
		3	Gen.Purpose Input
		2	NC

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

10 pin PALM special connector
at the PALM (keypad down)

Pinouts.ru > PDA, HandHeld computers ports pinouts > Pinout of Palm Pilot cradle cable and layout of 9 pin D-SUB female connector and 10 pin PALM special connector	Document status:	correct
Source(s) of this and additional information: Palm cradle	1 reports
Last updated at Mon Dec 18 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
13705 hits since March 4, 2005