Sony RGB Multi Input pinout comments

There are 3 approved reports in our database

User opinion Comment Approved?
ERROR FIXED Please include in diagram where the KEY of the connector sits , the way you show it in your diagram the plug could be fitted both ways which can cause damage to the television or monitor . Thankyou YES
ERROR FIXED Your pin out diagram of the plug is totally wrong and has caused me many nights of stress .
I physically removed the Sonys rear circuit board and it shows printed on the board the numbers on each pins which do do correspond to yours listed. With your Plug diagram you show on the top row from left to right pins 2 to 34 , bottom row from left to right pins 1 to 33. Now this is totally wrong , with the Sony plug it reads as followed top row from left to right 18 to 34 , bottom row from left to right 1 to 17. Also what was not shown in your diagram was were the plugs key should be positioned ( plug could be fitted two ways and can cause damage if incorrectly fitted) the key should be positioned on the top row ( 18 to 34 ) of the multi pin plug. Regards D.S YES
CORRECT http://pinouts.ru/Video/sgi_ldi_pinout.shtml
this connector is the same one physically
thought you would want to know YES

[Back to document]

User opinion	Comment	Approved?
ERROR FIXED	Please include in diagram where the KEY of the connector sits , the way you show it in your diagram the plug could be fitted both ways which can cause damage to the television or monitor . Thankyou	YES
ERROR FIXED	Your pin out diagram of the plug is totally wrong and has caused me many nights of stress . I physically removed the Sonys rear circuit board and it shows printed on the board the numbers on each pins which do do correspond to yours listed. With your Plug diagram you show on the top row from left to right pins 2 to 34 , bottom row from left to right pins 1 to 33. Now this is totally wrong , with the Sony plug it reads as followed top row from left to right 18 to 34 , bottom row from left to right 1 to 17. Also what was not shown in your diagram was were the plugs key should be positioned ( plug could be fitted two ways and can cause damage if incorrectly fitted) the key should be positioned on the top row ( 18 to 34 ) of the multi pin plug. Regards D.S	YES
CORRECT	http://pinouts.ru/Video/sgi_ldi_pinout.shtml this connector is the same one physically thought you would want to know	YES