User opinion | Comment | Approved? |
---|
ERROR FIXED | X - R-200KOhm to GND PIN 2 and 3 short is corect for charging | YES |
CORRECT | The pin outs were correct. The description of which pins are shorted to get the phone into charge mode was also correct | YES |
ERROR FIXED | it's 200k or 220k | YES |
CORRECT | correct | YES |
CORRECT | | YES |
INCORRECT | in the corrected section the pins for charging are marked as corrected but the text and table are still wrong, see http://krhainos.tk/motoplug.jpg for details | YES |
CORRECT | | YES |
CORRECT | Confirmed via resistance testing and also via attempting charge a RAZR via a normal USB A - USB mini cable from a USB solar panel with negative results. Creating a cable from Motorolas original wall chargers USB mini connector and a regular USB A cable allows it to charge from a USB solar panel. | YES |
CORRECT | Confirmed working with 220k resistor. D- can be connected before or after the resistor without any negative effect. | YES |
CORRECT | I opened the AC charger while soldering a broken wire. I was able to verify the connections (pin1: +5VDC, pin4: GND ), and the value of the resistor (200K) between pin4 and pinX. After soldering the broken wire, I connected to the cell phone and started recharging without any problems. I also took some pics to save with the documentation. | YES |
CORRECT | | YES |