Pinouts of Connectors

Ericsson and some Sony Ericsson universal data and service cables schematic pinout comments

There are 14 approved reports in our database

User opinionCommentApproved?
INCORRECTseems no work any of this diagrams,, i test with a t28 and t616 YES
INCORRECT��� ������� ���������� ��� ��� (��� COM-�����) �������� �� ��� ������ �� ����������.������� SonyEricsson R600s.��� ���������� (��������� 3�4 �������)������� ����� ��������� � ���, ��� "Data port open".���������� ���������� ����������. YES
CORRECTserial data cable sheme mark as correct but miss the autopower 232 explanation YES
INCORRECT YES
ERROR FIXEDFirst diagram is incorrect: the capacitor on pin 2 of MAX232 must be between pin2 and GND, not between pin2 and Vcc. YES
CORRECT YES
CORRECTThe "Another scheme for almost all of Ericsson and SonyEricsson cellular phones" works just fine for me! YES
CORRECT YES
CORRECTThe documento is 100% correct. I just made the flashing one and the data one and worked as espected. Thanks. YES
CORRECT YES
CORRECT YES
INCORRECTThe values of C1-C4 are for Vcc between 3.0V to 3.6V. Readers should refer to,
Table 2. Required Minimum Capacitor Values
of the MAX3232 datasheet (www.maxim-ic.com) for Vcc between 4.5V to 5.5V.

The datasheet also indicates C3 CAN BE RETURNED TO EITHER VCC OR GROUND, not just ground. 		YES
CORRECTPlease put a direct link to http://pinouts.ru/CellularPhones-P-W/erics_t28_pinout.shtml in this page. YES
CORRECT YES


[Back to document]