APC Smart UPS cable pinout comments

There are 21 approved reports in our database

User opinion Comment Approved?
CORRECT This pinout worked like a champ. I'm using PowerChute Business Edition (free download from APC) on Windows 2003 server with an APC Smart-UPS 2200. YES
CORRECT worked :-) YES
CORRECT YES
CORRECT YES
CORRECT worked for me!received all status info: volts, status, battery % chgrd, etc... YES
CORRECT YES
CORRECT Works perfectly when using a Sun Ultra5 workstation with Solaris 8 and APC PowerChute Business Edition web-based interface. Gives full status of UPS and battery run-time. UPS is connected to /dev/ttyb. YES
CORRECT Cable works perfectly using this diagram, a Smart UPS 700 connected to /dev/ttyb, Sun Ultra5, Solaris 8, and APC PowerChute Business Edition web interface. All status and options are viewable/setable. YES
CORRECT Great work guys!! Keep on! I owe you one! YES
CORRECT YES
CORRECT YES
CORRECT correct YES
CORRECT Works great with my APC Smart-UPS 1000.. YES
CORRECT This is CORRECT; had a SmartUPS 1500 with Network Management Card and no way to reconfigure it without the �special� serial cable� could not be found. With your pinout diagram I built a cable so I could reconfigure the network management card� thanks

C
YES
CORRECT Works with Model Back-UPS Pro 650S YES
CORRECT Nicely done!
Works perfectly both with build-in windows USP management console and APCs PowerChute software. THX a lot... YES
CORRECT Very useful! This is one of the few sites on Internet Which has some sense! YES
CORRECT the docu is correct, the cable work fine with windows XP SP2 and smart UPS 700 YES
CORRECT Just made the cabel based on this pinout. Everything works perfectly.
YES
CORRECT mere YES
CORRECT Works like a charm, Its the official model 940-0024C cable recommended by apcupsd. They suggest it might even work without the DCD-DTR RTS-CTS shorts but that didn`t work for me.

http://www.apcupsd.org/manual/Cables.html YES

[Back to document]

User opinion	Comment	Approved?
CORRECT	This pinout worked like a champ. I'm using PowerChute Business Edition (free download from APC) on Windows 2003 server with an APC Smart-UPS 2200.	YES
CORRECT	worked :-)	YES
CORRECT		YES
CORRECT		YES
CORRECT	worked for me!received all status info: volts, status, battery % chgrd, etc...	YES
CORRECT		YES
CORRECT	Works perfectly when using a Sun Ultra5 workstation with Solaris 8 and APC PowerChute Business Edition web-based interface. Gives full status of UPS and battery run-time. UPS is connected to /dev/ttyb.	YES
CORRECT	Cable works perfectly using this diagram, a Smart UPS 700 connected to /dev/ttyb, Sun Ultra5, Solaris 8, and APC PowerChute Business Edition web interface. All status and options are viewable/setable.	YES
CORRECT	Great work guys!! Keep on! I owe you one!	YES
CORRECT		YES
CORRECT		YES
CORRECT	correct	YES
CORRECT	Works great with my APC Smart-UPS 1000..	YES
CORRECT	This is CORRECT; had a SmartUPS 1500 with Network Management Card and no way to reconfigure it without the �special� serial cable� could not be found. With your pinout diagram I built a cable so I could reconfigure the network management card� thanks C	YES
CORRECT	Works with Model Back-UPS Pro 650S	YES
CORRECT	Nicely done! Works perfectly both with build-in windows USP management console and APCs PowerChute software. THX a lot...	YES
CORRECT	Very useful! This is one of the few sites on Internet Which has some sense!	YES
CORRECT	the docu is correct, the cable work fine with windows XP SP2 and smart UPS 700	YES
CORRECT	Just made the cabel based on this pinout. Everything works perfectly.	YES
CORRECT	mere	YES
CORRECT	Works like a charm, Its the official model 940-0024C cable recommended by apcupsd. They suggest it might even work without the DCD-DTR RTS-CTS shorts but that didn`t work for me. http://www.apcupsd.org/manual/Cables.html	YES