User opinion | Comment | Approved? |
---|
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | It's ok. | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | thanks | YES |
CORRECT | thanks | YES |
CORRECT | | YES |
CORRECT | Very handy information. Pinout works great. | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
ERROR FIXED | usb-mini pinout picture is reversed | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | Excellent references for new user and cable designers! | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
ERROR FIXED | USB-mini drawing shows conductors on bottom (like plug) and is numbered like plug, but has outline of receptacle. | YES |
ERROR FIXED | See http://www.accesscomms.com.au/Reference/USB.htm. Note different shell outlines for type-A and type-B mini plugs (the angles are in different places). | YES |
CORRECT | This pinout is correct. I used it to interface a docking station with USB today at work. | YES |
CORRECT | | YES |
CORRECT | USED THIS GUIDE TO MAKE MY EXTERNAL USB2.0 CARD READER INTERNAL. SINCE USB PLUG WAS CRUSHED IN. GUIDE WAS PERFECT.PINOUT.RU HELPED ME REACH MY GOAL. THANKS! | YES |
CORRECT | correct | YES |
CORRECT | | YES |
CORRECT | | YES |
INCORRECT | Only discrepancy I see is the colors of the Data wires. White and Green could be reversed. | YES |
CORRECT | Yes, this is correct! | YES |
CORRECT | Good Info | YES |
CORRECT | | YES |
CORRECT | Very handy information. Pinout works great!!! | YES |
INCORRECT | | YES |
CORRECT | fully correct and tested | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | right. | YES |
INCORRECT | Acording to the diagrams in this the USB-A pin 1 connector connects to pin4 of the socket which is wrong one of them has the pin numbers in the wrong order | YES |
CORRECT | | YES |
INCORRECT | Pin x on the mini-usb is an ID-Pin, used in some USB-OTG (USB On-The-Go) designs, where a device can be both master and slave. | YES |
CORRECT | | YES |
CORRECT | | YES |
CORRECT | | YES |
INCORRECT | How does USB cable transmit 480MHz data and clock ?? Hi-speed mode ?? The device should have uControler faster than 480MHz. I didnt see any device with uC faster then 10..30 MHz. This is maximally pigheaded information. It isnt authors mistake... Its an mistake from marketting - pigheaded marketting bosses ]: | YES |