Pinouts.ru talks
January 19, 2008, 13:30:19 *
 
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
   Home   Help Search Login Register  
Pages: [1] |   Go Down
  Reply  |  Send this topic  |  Print  
Author Topic: Zire 72 connecters  (Read 104 times)
Yo-Saff-Bridge
Guest
« on: January 10, 2008, 02:14:51 »
Reply with quote

kinda sorta pinouts for the Zire 72:

There's both a mini-USB plug and AC adapter jack at the bottom of the Zire 72. There's no PalmOne "Universal" Connector like on the 71, so it won't work with a lot of other accessories for the palm. The Zire 71, however,  *does* charge through the mini-USB, but it appears to charge slower, and the green charging LED, located on the top-left of the unit, does not light like when you use the AC adapter. Also, the automatic "stay-on" feature (setting) does not function when charging via USB

The AC adapter (aka "wall-wart") says it is rated at 5.2 volt DC with 500mA and the center of the coaxial power connector is positive. With my DMM, I measured 5.66 volts with the connector not plugged into the Zire 72. The connector is most likely a 2.35 mm OD ? 0.70 mm ID (Radio Shack Adaptaplug Size A, also called EIAJ-01, but I'll try to update this to confirm.
Logged
Pages: [1] |   Go Up
  Reply  |  Send this topic  |  Print  
 
Jump to:  

+ Quick Reply
With a Quick-Reply you can use bulletin board code and smileys as you would in a normal post, but much more conveniently.

Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC