|
The EVC connector is a combination analog and digital connector designed to carry VGA/RGB, FireWire, audio, and USB signals. The EVC connector is essentially the same as the DVI connector, except it carries different signals. It was designed to simplify computer-monitor connections and to carry video signals with a greater bandwidth that is possible with a VGA connector. | Pin | Signal |
|---|
| 1 | TMDS Data 2 + |
| 2 | TMDS Data 2 � |
| 3 | Ground |
| 4 | Ground |
| 5 | Hsync |
| 6 | Vsync |
| 7 | Ground |
| 8 | CP+ |
| 9 | 1394 Pair Data 1 A � |
| 10 | 1394 Pair Data 1 A + |
| 11 | TMDS Data 1 + |
| 12 | TMDS Data 1 � |
| 13 | Ground |
| 14 | TMDS Clock + |
| 15 | TMDS Clock � |
| 16 | USB Data + |
| 17 | USB Data � |
| 18 | Ground / 1394 SHIELD / CHARGING POWER INPUT- |
| 19 | 1394 VG |
| 20 | 1394 VP |
| 21 | TMDS Data 0 + |
| 22 | TMDS Data 0 � |
| 23 | Ground |
| 24 | Stereo Sync |
| 25 | Ground |
| 26 | DDC Data |
| 27 | DDC Clock |
| 28 | +5VDC |
| 29 | 1394 Pair Data 1 B � |
| 30 | 1394 Pair Data 1 B + |
| C1 | RED VIDEO OUT |
| C2 | GRN VIDEO OUT |
| C3 | PX CLOCK OUT |
| C4 | BLU VIDEO OUT |
| C5 | COMMON GND RTN |
Pins 8, 18 and 28 are recessed in the cable end connector (plug) to provide for proper power/ground sequencing. Signal Type: analog and digital. DDC = Display Data Channel. T.M.D.S. = Transition Minimized Differential Signal. USB = Universal Serial Bus
This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom). |
| |
