|
| Pin | Pin
Name | Description |
| 1 |
R out |
Monitor |
| 2 |
G out |
Monitor |
| 3 |
B out |
Monitor |
| 4 |
DDC2: SDA |
Monitor and PC |
| 5 |
G in |
PC |
| 6 |
GND |
Tied to all the grounds and ID0 on PC side (5,6,7,8,10,11) some grounds on monitor (5,6,8,10) |
| 7 |
G GND |
Tied to green ground on monitor (presumably for Sync-On-Green) |
| 8 |
GND |
Tied to all the grounds and ID0 on PC side (5,6,7,8,10,11) some grounds on monitor (5,6,8,10) |
| 9 |
R in |
PC |
| 10 |
B in |
PC |
| 11 |
H/C sync in |
PC |
| 12 |
V sync in |
PC |
| 13 |
H/C sync out |
Monitor |
| 14 |
V sync out |
Monitor |
| 15 |
DDC2: SCL |
Monitor and PC |
May be compatible with other Grandtec scan converters using "Y cable". See www.grandtec.com
This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom). |
| |
