DFP-compliant MDR-20 pinout

video connector

20 pin MDR20 female connector
at the videocard

The DFP connector is a 20 pin connector. It and the DVI connector carry the same type of digital signal (TMDS). The DFP connector was created before the DVI, by VESA, and is only designed to carry digital video, so there is no provision to carry analog.

Pin	Signal
1	TMDS Data 1 +
2	TMDS Data 1 �
3	Ground
4	Ground
5	TMDS Data C +
6	TMDS Data C �
7	Ground
8	+5V
9	Reserved
10	Reserved
11	TMDS Data 2 +
12	TMDS Data 2 -
13	Ground
14	Ground
15	TMDS Data 0 +
16	TMDS Data 0 -
17	Reserved
18	Reserved
19	DDC Data
20	DDC Clock

Signal type: digital. DDC = Display Data Channel. T.M.D.S. = Transition Minimized Differential Signal.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > VGA, DVI, S-Video and other video connectors pinouts listing > Pinout of DFP-compliant MDR-20 and layout of 20 pin MDR20 female connector	Document status:	unknown
Source(s) of this and additional information: Matrox G200 Flat Panel Add-On - User Guide	0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
18005 hits since March 4, 2005