Digital Flat Panel (DFP) pinout

video connector

The DFP connector is a 20 pin connector. It and the DVI connector carry the same type of digital signal (TMDS). The DFP connector was created before the DVI, by VESA, and is only designed to carry digital video, so there is no provision to carry analog.

Pin	Name
1	TX1+
2	TX1-
3	SHLD1
4	SHLDC
5	TXC+
6	TXC-
7	GND
8	+5V
9	NC
10	NC
11	TX2+
12	TX2-
13	SHLD2
14	SHLD0
15	TX0+
16	TX0-
17	NC
18	HPD
19	DDC_DAT
20	DDC_CLK

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > VGA, DVI, S-Video and other video connectors pinouts listing > Pinout of Digital Flat Panel (DFP) and layout of 20 pin MDR20 female connector	Document status:	correct
Source(s) of this and additional information: Tech page at Network Technologies Inc, from Hardware Book	2 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
22466 hits since March 4, 2005