Hardware pinouts information and cables schemes

Apple video/composite out pinout

video connector

bookmark this page

The iMac G5 detects the type of display adapter that is plugged in and programs the graphics IC to route the appropriate video signals to the connector. The signal assignments on the video connector when the composite adapter is attached are shown

14 pin Apple video connector layout

14 pin Apple video connector



PinSignalDescription
1Ground  
2n.c.  
3n.c.  
4Ground  
5S-video C  
6Ground  
7S-video Y  
8+5 volts  
9Composite video  
10DDC data  
11DDC clock  
12Ground  
13Ground (for /Cable Detect)  
14Ground  


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > VGA, DVI, S-Video and other video connectors pinouts listing >  Pinout of Apple video/composite out and layout of 14 pin Apple video connector
Document status: unknown
Source(s) of this and additional information: iMac G5 developer note 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
10818 hits since March 4, 2005