Atari ST monitor pinout

video connector

Connector is 13 pin DIN female at the computer.

Pin	Name	Description
1	AO	Audio Out
2	CVIDEO	Composite Video
3	GPO	General Purpose Output - linked to Port A bit 6 of the sound chip, user programmable
4	M detect	if line is low, ST enters high res monochrome mode (no other use) linked to pin 17 of MFP68901 chip
5	AI	Audio In
6	G	Green
7	R	Red
8	+12V	+12 VDC (520ST has GND)
9	HSYNC	Horizontal Sync
10	B	Blue
11	MVIDEO	Monochrome Video
12	VSYNC	Vertical Sync
13	GND	Ground

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > VGA, DVI, S-Video and other video connectors pinouts listing > Pinout of Atari ST monitor and layout of connector	Document status:	unknown
Source(s) of this and additional information: Hardware Book, Lawrence Wright, Steve & Sally Blair	0 reports
Last updated at Tue Oct 3 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
10062 hits since March 4, 2005