Panasonic CD-ROM connector pinout

connector or cable wiring scheme

40 pin IDC male connector
at the controller & CD-ROM

Pin	Name	Description
1	GND	Ground
2	RESET	CD-Reset
3	GND	Ground
4	GND	Ground
5	GND	Ground
6	MODE0	Operation Mode Bit 0
7	GND	Ground
8	MODE1	Operation Mode Bit 1
9	GND	Ground
10	WRITE	CD-Write
11	GND	Ground
12	READ	CD-Read
13	GND	Ground
14	ST0	CD-Status Bit 0
15	GND	Ground
16	n/c	No Connection
17	GND	Ground
18	n/c	No Connection
19	GND	Ground
20	ST1	CD-Status Bit 1
21	GND	Ground
22	EN	CD-Data Enable
23	GND	Ground
24	ST2	CD-Status Bit 2
25	GND	Ground
26	S/DE	CD-Status/Data Enable
27	GND	Ground
28	ST3	CD-Status Bit 3
29	GND	ground
30	GND	ground
31	D7	CD-Data 7
32	D6	CD-Data 6
33	GND	ground
34	D5	CD-Data 5
35	D4	CD-Data 4
36	D3	CD-Data 3
37	GND	ground
38	D2	CD-Data 2
39	D1	CD-Data 1
40	D0	CD-Data 0

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

40 pin IDC female connector
at the cable

Pinouts.ru > Disk drives connectors pinouts listing > Pinout of Panasonic CD-ROM connector and layout of 40 pin IDC male connector and 40 pin IDC female connector	Document status:	unknown
Source(s) of this and additional information: SoundFX 16-bit Multimedia Kit Hardware Manual from Reveal Keith Solomon	0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
11199 hits since March 4, 2005