Hardware pinouts information and cables schemes

3.5 inch micro Floppy Disk Drive connector (26 pin) pinout

connector or cable wiring scheme

bookmark this page

micro conector (26x1)



PinPin
Name
Description
1 VCC VCC +5V
2 /INDEX Index
3 VCC VCC +5V
4 /DRVS Drive Sel
5 VCC VCC +5V
6 /DSKCHG Disk Change
7 RES Reserved
8 READY  
9 MEDIA  
10 /MOTE Motor Enable
11 /REDWC Density Select
12 /DIR Direction
13 RES Reserved (Inuse)
14 /STEP Step
15 GND Ground
16 /WDATE Write Data
17 GND Ground
18 /WGATE Write Gate
19 GND Ground
20 /TRK00 Track00
21 GND Ground
22 /WPT Write Protect
23 GND Ground
24 /RDATA Read Data
25 GND Ground
26 /SIDE1 Side 1 Select

Pinouts.ru > Disk drives connectors pinouts listing >  Pinout of 3.5 inch micro Floppy Disk Drive connector (26 pin) and layout of connector
Document status: correct
Source(s) of this and additional information: http://www.citizen.co.uk/pdf/x1de00a.pdf
Contributor: H_Berry
3 reports
Last updated at Sat Apr 7 2007. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7766 hits since January 10, 2007