Hardware pinouts information and cables schemes

Amiga 1200 CPU-port pinout

bus or interface

bookmark this page

UNKNOWN connector
at the computer


Pin Name Description
1n/cReserved
2n/cReserved
3n/cReserved
4n/cReserved
5n/cReserved
6n/cReserved
7n/cReserved
8n/cReserved
9GNDGround
10+5V+5 Volts DC
11A23Address 23
12A22Address 22
13A21Address 21
14A20Address 20
15A19Address 19
16A18Address 18
17A17Address 17
18A16Address 16
19GNDGround
20+5V+5 Volts DC
21A15Address 15
22A14Address 14
23A13Address 13
24A12Address 12
25A11Address 11
26A10Address 10
27A9Address 9
28A8Address 8
29GNDGround
30+5V+5 Volts DC
31A7Address 7
32A6Address 6
33A5Address 5
34A4Address 4
35A3Address 3
36A2Address 2
37A1Address 1
38A0Address 0
39GNDGround
40+5V+5 Volts DC
41D31Data 31
42D30Data 30
43D29Data 29
44D28Data 28
45D27Data 27
46D26Data 26
47D25Data 25
48D24Data 24
49GNDGround
50+5V+5 Volts DC
51D23Data 23
52D22Data 22
53D21Data 21
54D20Data 20
55D19Data 19
56D18Data 18
57D17Data 17
58D16Data 16
59GNDGround
60+5V+5 Volts DC
61D15Data 15
62D14Data 14
63D13Data 13
64D12Data 12
65D11Data 11
66D10Data 10
67D9Data 9
68D8Data 8
69GNDGround
70+5V+5 Volts DC
71D7Data 7
72D6Data 6
73D5Data 5
74D4Data 4
75D3Data 3
76D2Data 2
77D1Data 1
78D0Data 0
79GNDGround
80+5V+5 Volts DC
81/IPL2 
82/IPL1 
83/IPL0 
84n/cReserved
85/RSTReset
86/HLTHalt
87n/cReserved
88n/cReserved
89SIZE1 
90SIZE0 
91/ASAddress Strobe
92/DSData Strobe
93R/WRead/Write
94/BERRBus Error
95n/cReserved
96/AVEC 
97/DSACK1 
98/DSACK2 
99CPUCKLA 
100ECLOCKEClock pulse
101GNDGround
102+5V+5 Volts DC
103FC2Processor Status 2
104FC1Processor Status 1
105FC0Processor Status 0
106/RMC 
107n/cReserved
108n/cReserved
109n/cReserved
110n/cReserved
111/BRSlot specific Bus Arbitration
112/BGSlot specific Bus Arbitration
113n/cReserved
114/BOSS 
115/FPUCSFPU Chip select
116/FPUSENSEFPU Sense
117CCKA 
118/RESETReset
119GNDGround
120+5V+5 Volts DC
121/NETCS 
122/SPARECS 
123/RTCCSRealtime Clock Chip select
124/FLASH 
125/REG 
126/CCENA 
127/WAIT 
128/KBRESETKeyboard reset
129/IORDIO Read
130/IOWRIO Write
131/OEOutput enable
132/WE 
133/OVR/DTACK Override
134XRDYExternal Ready
135/ZORRO 
136/WIDE 
137/INT2Interrupt level 2
138/INT6Interrupt level 6
139GNDGround
140+5V+5 Volts DC
141SYSTEM1System1 Ground
142SYSTEM0System0 Ground
143/xRxD 
144/xTxD 
145/CONFIG OUT 
146AGNDAudio Ground
147ALEFTAudio Left
148ARIGHTAudio Right
149+12V+12 Volts DC
150-12V-12 Volts DC


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > Buses and slots connectors pinouts >  Pinout of Amiga 1200 CPU-port and layout of connector
Document status: unknown
Source(s) of this and additional information: Hardware Book 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7851 hits since March 4, 2005