SGI serial port pinout

serial interface

9 pin D-SUB male connector
at the computer ?

Pin	Name	Description	Color
4	TD	Transmit Data	Orange
3	RD	Receive Data	Black
2	RTS	Request To Send	Red
1	CTS	Clear To Send	Green
8	SG	Signal Ground	Brown
7	DCD	Data Carrier Detect	White
6	DTR	Data Terminal Ready	Blue

Note: O2, Octane, and Origin systems, have the IBM(R) PC/AT(tm) compatible pin assignments

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > RS-232 and other serial ports and interfaces pinouts listing > Pinout of SGI serial port and layout of 9 pin D-SUB male connector	Document status:	unknown
Source(s) of this and additional information: Chan"s pinouts page	0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
8767 hits since March 4, 2005