Serial (MSX) pinout

serial interface

9 pin D-SUB female connector
at the computer

Pin	Name	Dir	Description
1	PG	-	Protective Ground
2	TXD		Transmit Data
3	RXD		Receive Data
4	RTS		Request to Send
5	CTS		Clear to Send
6	DSR		Data Set Ready
7	GND	-	Signal Ground
8	DCD		Carrier Detect
9	DTR		Data Terminal Ready

Note: Direction is DTE (Computer) relative DCE (Modem)

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > RS-232 and other serial ports and interfaces pinouts listing > Pinout of Serial (MSX) and layout of 9 pin D-SUB female connector	Document status:	unknown
Source(s) of this and additional information: Mayer´s SV738 X´press I/O map, from Hardware Book	0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
9577 hits since March 4, 2005