Hardware pinouts information and cables schemes

Apple Macintosh RS-422 pinout

serial interface

bookmark this page

It´s possible to connect RS-232 peripheral to the RS-422 port available on Macintosh computers. Use RXD- as RXD, TXD- as TXD, Ground RXD+, Leave TXD+ unconnected, GPi as CD.



Pin Name Dir Description
1HSKo-->Output Handshake
2HSKi/CLK<--Input Handshake or External Clock
3TXD--->Transmit Data (-)
4GND---Ground
5RXD-<--Receive Data (-)
6TXD+-->Transmit Data (+)
7GPi<--General Purpose Input
8RXD+<--Receive Data (+)

Note: Direction is DTE (Computer) relative DCE (Modem).


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > RS-232 and other serial ports and interfaces pinouts listing >  Pinout of Apple Macintosh RS-422 and layout of 8 pin mini-DIN female connector
Document status: unknown
Source(s) of this and additional information: comp.sys.mac.comm FAQ Part 1, Apple Tech Info Library, Article ID: TECHINFO-0001699, from Hardware Book, Pierre Olivier, Ben Harris, Nathan Schmidt 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
10457 hits since March 4, 2005