SFX Power Supply pinout

connector or cable wiring scheme

20 pin MOLEX 39-29-9202 connector layout

20 pin MOLEX 39-29-9202 connector
at the motherboard

Pin	Name	Color	Description
1	3.3V	Orange	+3.3 VDC
2	3.3V	Orange	+3.3 VDC
3	COM	Black	Ground
4	5V	Red	+5 VDC
5	COM	Black	Ground
6	5V	Red	+5 VDC
7	COM	Black	Ground
8	PWR_OK	Gray	Power Ok (+5V & +3.3V is ok)
9	5VSB	Purple	+5 VDC Standby Voltage (max 10mA)
10	12V	Yellow	+12 VDC
11	3.3V	Orange	+3.3 VDC
12	-12V	Blue	-12 VDC
13	COM	Black	Ground
14	/PS_ON	Green	Power Supply On (active low)
15	COM	Black	Ground
16	COM	Black	Ground
17	COM	Black	Ground
18	res		Reserved
19	5V	Red	+5 VDC
20	5V	Red	+5 VDC

18 AWG is recommended for all wires except pin 11, which should be 22 AWG For 300W configurations 16 AWG is recommended.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

20 pin MOLEX 39-01-2200 connector diagram

20 pin MOLEX 39-01-2200 connector
at the cable

Pinouts.ru > ATX, BTX, WTX and other power supply cables connectors pinouts listing > Pinout of SFX Power Supply and layout of 20 pin MOLEX 39-29-9202 connector and 20 pin MOLEX 39-01-2200 connector	Document status:	unknown
Source(s) of this and additional information: Hardware Book	2 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
14519 hits since March 4, 2005