Hardware pinouts information and cables schemes

Apple Macintosh Classic Internal Power pinout

connector or cable wiring scheme

bookmark this page

Available at location J12 on the Apple Macintosh Classic logic board?



14 pin connector at the motherboard
Pin Name
1+12 volts
2+ 5 volts
3+ 5 volts
4/VSYNC
5/HSYNC
6VIDOUT
7Sound
8-12 volts
9PWM (Brightness control signal)
10Ground
11Ground
12Ground
13Ground
14Ground


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > ATX, BTX, WTX and other power supply cables connectors pinouts listing >  Pinout of Apple Macintosh Classic Internal Power and layout of connector
Document status: unknown
Source(s) of this and additional information: Apple Tech Info Library 6532: Macintosh Classic, Internal Power connector Pinouts at Apple TIL homepage, from Hardware Book 0 reports
Last updated at Fri Aug 12 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
11339 hits since March 4, 2005