HP Workstation PSU pinout

connector or cable wiring scheme

24 pin MOLEX 44206-0007 connector layout

24 pin MOLEX 44206-0007 connector
at the System Board

System appears to use ATX signalling.

System Board Pin	Pin Name	Description
1	PwrGood	(Blue) Power Ok (+5V & +3.3V is ok)
2	V_STBY	(Orange) Standby Voltage
3	+5V	Red
4	+5V	Red
5	+5V	Red
6	+5V	Red
7	+5V	Red
8	+3V	Brown
9	+3V	Brown
10	+3V	Brown
11	+3V	Brown
12	+3V	Brown
13	Remote On	(White) Power Supply On
14	-5V	Purple
15	-12V	Green
16	+12V	Yellow
17	Ground	Black
18	Ground	Black
19	Ground	Black
20	Ground	Black
21	Ground	Black
22	Ground	Black
23	Ground	Black
24	Low Power	Grey

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > ATX, BTX, WTX and other power supply cables connectors pinouts listing > Pinout of HP Workstation PSU and layout of 24 pin MOLEX 44206-0007 connector	Document status:	correct
Source(s) of this and additional information: HP Kayak XU Technical Reference Manual	1 reports
Last updated at Mon Sep 4 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7318 hits since October 27, 2006