Hardware pinouts information and cables schemes

HP Power pinout

connector or cable wiring scheme

bookmark this page

this connector is not used often



Power Supply
Pin
Name Direction Description
1-12 Volts-12 Volts
2Ground-12 Volts Ground
3Ground+12 Volts Ground
4+12 Volts+12 Volts

This connector was actually used in some Pavilion models, in particular, ones that featured the EnSoniq soundcard. It is used to power the onboard power amplifier on these cards.


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > ATX, BTX, WTX and other power supply cables connectors pinouts listing >  Pinout of HP Power and layout of 4 pin HP video power connector
Document status: correct
Source(s) of this and additional information: http://www.power-on.com/miathppa1.html Wilfred Dumont 1 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
15870 hits since March 4, 2005