BTX motherboard power supply pinout

connector or cable wiring scheme

24 pin MOLEX 44206-0007 connector layout

24 pin MOLEX 44206-0007 connector
at the motherboard

Pin	Signal	Description
1	+3.3 VDC
2	+3.3 VDC
3	COM
4	+5 VDC
5	COM
6	+5 VDC
7	COM
8	PWR_OK	Power good - indicate that VDC voltages are in range.
9	+5 VSB	Standby voltage
10	+12 VDC
11	+12 VDC
12	+3.3 VDC
13	+3.3 VDC
14	-12 VDC
15	COM
16	PS_ON#	Active low. TTL compatible (0.1-0.8V low; 2.0 high?). When low - DC outputs are enabled. When high - power supply should not deliver DC current.
17	COM
18	COM
19	COM
20	N/C
21	+5 VDC
22	+5 VDC
23	+5 VDC
24	COM

24 pin MOLEX 39-01-2240 or equivalent connector diagram

24 pin MOLEX 39-01-2240 or equivalent connector
at the power supply cable

Pinouts.ru > ATX, BTX, WTX and other power supply cables connectors pinouts listing > Pinout of BTX motherboard power supply and layout of 24 pin MOLEX 44206-0007 connector and 24 pin MOLEX 39-01-2240 or equivalent connector	Document status:	correct
Source(s) of this and additional information: BTX interface specification at the www.formfactors.org	3 reports
Last updated at Fri Oct 28 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
29309 hits since March 4, 2005