Apple TiBook power connector pinout

connector or cable wiring scheme

3 pin stereo plug connector
at the power adapter cable (2.5mm jack used)

Basic version of Apple power connector
Works without the internal LEDs or the outer sleeve. The basis of the connector is a 2.5mm (yes 2.5mm, not 3.5mm) male jack. Functioning 100%, including charging the battery.

power adapter cable Pin	Name	Direction	Description
1	sense		400KOhm to GND
2	GND		Ground
3	Vin	<--	+24V power

Pinouts.ru > ATX, BTX, WTX and other power supply cables connectors pinouts listing > Pinout of Apple TiBook power connector and layout of 3 pin stereo plug connector	Document status:	correct
	3 reports
Last updated at Mon Jul 31 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
9753 hits since April 17, 2006