Creative SCP0501000P MP3 player charger pinout

connector or cable wiring scheme

5 pin mini-USB plug connector
at the AC adapter

AC adapter Pin	Pin Name	Description
1	+5 VDC	PC USB Pin 1 (+5 VDC)
2	USB Data	not connected
3	USB Data	not connected
x		+3.3 VDC
4	GND	PC USB Pin 4 (GND)

Did some testing on my Creative wall charger after wondering why my MicroPhoto would not charge off of a "standard" car USB charger. Found that mystery pin X carries +3.3 VDC, likely as a trigger for the player to charge if it is not seeing PC USB data on pins 2 and 3. Awaiting parts to try building my own cable for further testing.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > MP3 players and other portable devices pinouts listing > Pinout of Creative SCP0501000P MP3 player charger and layout of 5 pin mini-USB plug connector	Document status:	correct
Contributor: Craig Powell	2 reports
Last updated at Tue Jun 26 2007. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
2749 hits since June 26, 2007