Cable for ROBOTRON 6329.02 pinout

cable wiring

9 pin D-SUB female connector
to the computer

5 6 7 8 9 10 11 12 13 14 15 16 17 18
1 -> -> <- <- <- ->-> <- -><- ->-><- ->
2 <- <- <- -><- <- <- <- <- <- <- <-<- ->

Add to autoexec.bat
MODE COM2:4800,N,8,1,P
MODE LPT1:-COM2:
path\prnruh1m.com
Driver prnruh1m.com is here
http://www.uniyar.ac.ru/~dingo/printer/prnruh1m.zip

ROBOTRON 6329.02 Pin name	ROBOTRON 6329.02 Pin	IBM PC/XT/AT COM2 (RS232/423,V24) Pin 25-pin (9-pin)	IBM PC/XT/AT COM2 (RS232/423,V24) Pin name
SG /102	A1	7 (5)	SG /102
TxD /103	A3	3 (2)	RxD /104
RxD /104	B4	2 (3)	TxD /103
RTS /105	A5	5 (8)	CTS /106
CTS /106	B6	4 (7)	RTS /105
DSR /107	A7	20 (4)	DTR /108.2
DTR /108.2	B8	6 (6)	DSR /107
GND /101	B2	8 (1)	GND /101

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

UNKNOWN connector
to the printer

Pinouts.ru > Parallel interfaces and ports cables schemes > Pinout of Cable for ROBOTRON 6329.02 and layout of 9 pin D-SUB female connector	Document status:	unknown
Source(s) of this and additional information: John	0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
8895 hits since March 4, 2005