Hardware pinouts information and cables schemes

Dataproducts D-Sub 50 Parallel pinout

parallel interface

bookmark this page



Pin Return Dir Description Active State
226<--ReadyHigh
215<--On LineHigh
237<--DemandHigh
3837-->Data StrobeHigh
193-->Data 1n/a
204-->Data 2n/a
12-->Data 3n/a
4140-->Data 4n/a
3418-->Data 5n/a
4342-->Data 6n/a
3635-->Data 7n/a
2844-->Data 8n/a
2913-->Parityn/a
5032<--Ident 0n/a
4916<--Ident 1n/a
4645-->Interface Verify. Tied together.Low?
1239-->+5 VDC (Test)High
2711<--Parity ErrorHigh
259<--Bottom of FormHigh
248<--Top of FormHigh
3014-->Paper InstructionHigh
3115-->Buffer ClearHigh
2610<--Paper MovingHigh
4817<--Paper MovingHigh
4733<--Not VFUHigh

Note: Direction is Host (Computer) relative Peripheral (Printer).
Note: Return is Ground signal for Unbalanced and the Negative Signal for Balanced.


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > Parallel interfaces pinouts listing >  Pinout of Dataproducts D-Sub 50 Parallel and layout of 50 pin D-SUB male connector and 50 pin D-SUB female connector
Document status: unknown
Source(s) of this and additional information: Hardware Book 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
9213 hits since March 4, 2005