Amstrad CPC6128 Printer port pinout

parallel interface

Pin	Name	Description
1	/STROBE	Strobe
2	D0	Data 0
3	D1	Data 1
4	D2	Data 2
5	D3	Data 3
6	D4	Data 4
7	D5	Data 5
8	D6	Data 6
9	GND	Ground
10	n/c	Not connected
11	BUSY	Busy
12	n/c	Not connected
13	n/c	Not connected
14	GND	Ground
15	n/c	Not connected
16	n/c	Not connected
17	n/c	Not connected
16	GND	Ground
17	n/c	Not connected
19	GND	Ground
20	GND	Ground
21	GND	Ground
22	GND	Ground
23	GND	Ground
24	GND	Ground
25	GND	Ground
26	GND	Ground
27	n/c	Not connected
28	GND	Ground
29	n/c	Not connected
30	n/c	Not connected
31	n/c	Not connected
32	n/c	Not connected
33	GND	Ground
34	n/c	Not connected
35	n/c	Not connected

Note: Pin 18 does not exist

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > Parallel interfaces pinouts listing > Pinout of Amstrad CPC6128 Printer port and layout of 35 pin EDGE connector	Document status:	unknown
Source(s) of this and additional information: Amstrad CPC6128 User Instructions Manual, from Hardware Book, Agnello Guarracino	0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
6713 hits since March 4, 2005