Hardware pinouts information and cables schemes

Handspring Visor Deluxe interface connector pinout

PDA connectors and cables

bookmark this page



Pinout of the Visor Deluxe PDA. Serial port voltages are 3.3V.
Pin 1 is on the left, as the Visor Deluxe lies screen down on a table with the connector nearest you and the Springboard slot furthest away from you.
Connector at the Bottom of the PDA
Bottom of the PDA
Pin
Name Direction Description
1 RX Data 3.3V input to Visor Deluxe serial port
2 Keyboard Detect 3.3V input to notify Visor Deluxe of presence of external keyboard
3 Hotsync interrupt 3.3V input to notify Visor Deluxe that Hotsync button on cradle was pushed
4 Ground Ground
5 USB + Data USB D+ line
6 USB - Data USB D- line
7 VDock Voltage from cradle. Connects internally to some Springboard modules to recharge onboard batteries.
8 TX Data 3.3V output from Visor Deluxe serial port


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > PDA, HandHeld computers ports pinouts >  Pinout of Handspring Visor Deluxe interface connector and layout of connector
Document status: unknown
Source(s) of this and additional information: http://www.felesmagus.com/visor/faq.html 0 reports
Last updated at Sun Apr 16 2006. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
5708 hits since April 17, 2006