PalmOne Treo 600 pinout

PDA connectors and cables

15 pin Palm special connector
at the bottom TREO 600

bottom TREO 600 Pin	Name	Direction	Description
1	RXD	-?-	Receive Data
2	TXD	-?-	O/P Transmit Data/Power
3	No Connect	-?-	GPIO to internal battery pack
4	HS2*	-?-	Serial Cradle Detect
5	HS1*	-?-	HotSync Interrupt
6	GND	-?-	Ground
7	USB D-	-?-	I/O USB Data Negative
8	USB D+	-?-	I/O USB Data Positive
9	DQ	-?-	I/O 1-wire communication pin
10	PACK+	-?-	a1 Battery Positive Terminal
11	PACK+	-?-	a1 Battery Positive Terminal
12	GND	-?-	Ground
13	GND	-?-	Ground
14	VDOCK	-?-	Cradle Power (charging)
15	VDOCK	-?-	Cradle Power (charging)

* indicates active-low signals

USB cable:

USB Pin	PDA Pin	Description
1	14	VBus
2	7	D+
3	8	D-
4	6	GND

4 pin USB A or USB B plug connector

Pinouts.ru > PDA, HandHeld computers ports pinouts > Pinout of PalmOne Treo 600 and layout of 15 pin Palm special connector and 4 pin USB A or USB B plug connector	Document status:	correct
Contributor: Genius	6 reports
Last updated at Tue Nov 7 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
10120 hits since August 13, 2005