Sony Clie PEG-T, NR, NX, SL, SJ, TG, TJ, TH55 series pinout |
PDA connectors and cables |
not for S and N series
The plug for SONY Clie T and NR models, should fits to all past and current Clie models, Clie T625,675C, NR70, SJ30, SL10, NX70, etc.. The T, NR, sj, SL of models (and probably also all future Clie"s) have no RS232 interface and RS232 devices can"t be directly attached to them. Some kind of converter needed. The Clie t plugs have all 20Pins. However only 18 are used and also only 18 counted. The two outside contacts on the left and on the right are not taken in account and not used here. If one counts directly at the plug, Pin 1 would be thus not occupied, pin 2 GND (logic and Powersupply), Pin 19 again GND (logic and Powersupply), and Pin 20 again not occupied. Who wants to go safe, pin 10 knows, the exit of the Li ION Akkus with a circuit analyzer against Pin 1 (GND) measures (3.4-4.2 V with Akkubetrieb, 5,2 V with external supply). The counting takes place from RIGHT to the left
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Pinouts.ru > PDA, HandHeld computers ports pinouts > Pinout of Sony Clie PEG-T, NR, NX, SL, SJ, TG, TJ, TH55 series and layout of connector |
correct | |
Source(s) of this and additional information: www.gpskabel.de/shop/clie_t.htm and rage.against.org/SonyCliePinout | 2 reports | |
Last updated at Sat Nov 12 2005. Submit additions or corrections for this document. | Is this document correct or incorrect? What is your opinion? |