PalmOne Treo 650, Treo 700w, 750v, Tungsten T5, E2, TX, 680, LifeDrive interface port pinout

PDA connectors and cables

16 pin PalmOne Treo 650 special connector layout

16 pin PalmOne Treo 650 special connector
at the Smartphone

Pin	Signal	Description
1	MIC_IN
2	AGND
3	SPKR_R
4	SPKR_L
5	POWER_OUT
6	HOTSYNC	short to GND (pin 10) for HOTSYNC
7	RXD	TTL, can't be directly connected to PC RS32
8	TXD	TTL, can't be directly connected to PC RS32
9	Reserved
10	DGND
11	USB_D-
12	USB_D+
13	VBUS
14	VDOCK_RTN
15	ADAPTER_ID
16	VDOCK
G	GND	in gap

For USB data cable (NOT confirmed) :

Palm Pin	USB Signal	PC USB Pin
16,13	USB +5V	1
11	USB D-	2
12	USB D+	3
G	USB GND	4

Please note, that as of the 3rd of August 2006 all the Palm documents number the pins in the opposite direction.

4 pin USB A or USB B plug connector diagram

4 pin USB A or USB B plug connector
at the computer´s cable

Pinouts.ru > PDA, HandHeld computers ports pinouts > Pinout of PalmOne Treo 650, Treo 700w, 750v, Tungsten T5, E2, TX, 680, LifeDrive interface port and layout of 16 pin PalmOne Treo 650 special connector and 4 pin USB A or USB B plug connector	Document status:	unknown
Contributor: updated by vladimir	6 reports
Last updated at Mon Aug 6 2007. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
26572 hits since August 13, 2005