Casio Cassiopeia E-125, BE-300, EG-800, EM500 cradle connector

��

UNKNOWN connector
at the device (display up, power is on the left side, headphone is on the right side)

Pin	Pin Name	Description
1	ADPIN	(?) Diode Cathode, from USB+5V
2	XSEL0	unconnected ?
3	GND
4	SEL0	connect to GND
5	SEL1	connect to GND
6	SEL2	connect to R-divider: 10k to GND, 4.7k to USB+5V
7	MPX0	unconnected ?
8	MPX1	unconnected ?
9	CTS	UART TTL level CTS
10	DCD	UART TTL level DCD (connect to 14, 15)
11	RX	UART TTL level RX - receive data
12	TX	UART TTL level TX - transmit data
13	RTS	UART TTL level RTS
14	DTR	UART TTL level DTR (connect to 10, 15)
15	DSR	UART TTL level DSR (connect to 10, 14)
16	MPX9	unconnected ?
17	+DATA	USB data Positive
18	-DATA	USB data Negative
19	V3	Power +3.3V from Cassiopeia
20	ADGND	USB GND

�� , �� . ��  ��!
�� (�� ), �� (�� ). �� .

Pinouts.ru > �� PDA, �� > �� Casio Cassiopeia E-125, BE-300, EG-800, EM500 cradle connector ��	�� :	��
��: GrayCat	0 ��
Last updated at Mon Aug 13 2007 (�� )	�� ?