xD picture card pinout

memory connector

18-pin Flash Card, by Toshiba/Olympus.
1 mm pin pitch.
3.3V power.
Standard NAND-Flash command set, plus additional

18-pin Flash Card Pin	Name	Description
18	GND	Ground (+Presence detect)
17	R/-B	Ready/-Busy (Open-drain)
16	-RE	Read Enable
15	-CE	Card Enable
14	CLE	Command Latch Enable
13	ALE	Address Latch Enable
12	-WE	Write Enable
11	-WP	Write Protect
10	GND	Ground
9	D0	Data0
8	D1	Data1
7	D2	Data2
6	D3	Data3
5	D4	Data4
4	D5	Data5
3	D6	Data6
2	D7	Data7
1	Vcc	Power

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > Memory slots and cards connectors pinouts > Pinout of xD picture card and layout of connector	Document status:	unknown
Contributor: GrayCat	1 reports
Last updated at Sat Sep 23 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
9773 hits since April 17, 2006