Hardware pinouts information and cables schemes

Apple IIc joystick pinout

connector or cable wiring scheme

bookmark this page

UNKNOWN connector
at the Apple computer


Pin Name Description
1GAMESW1Switch input 1 (sometimes called paddle button 1).
2+5V+5 VDC (max 100mA)
3GNDSystem ground.
4n/aNot used
5PDL0Paddle 0 hand controller input. Must be connected to a 150K ohm variable resistor connected to +5V.
6n/cNot connected
7GAMESW0Switch input 0 (sometimes called paddle button 0).
8PDL1Paddle 1 hand controller input; must be connected to a 150K ohm variable resistor connected to +5V.
9n/aNot used


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > Input devices (keyboards, mices, joysticks) pinouts >  Pinout of Apple IIc joystick and layout of connector
Document status: unknown
Source(s) of this and additional information: Apple Tech Info Library 1419: Apple IIc, External Pinouts at Apple TIL homepage 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7048 hits since March 4, 2005