Hardware pinouts information and cables schemes

C64 Control port pinout

connector or cable wiring scheme

bookmark this page



Control Port 1

Pin Name Dir Comment
1JOYA0<-- 
2JOYA1<-- 
3JOYA2<-- 
4JOYA4<-- 
5POT AY<-> 
6BUTTON A/LP<-> 
7+5V-->50 mA max
8GND--- 
9POT AX<-> 

Control Port 2

Pin Name Dir Comment
1JOYB0<-- 
2JOYB1<-- 
3JOYB2<-- 
4JOYB4<-- 
5POT BY<-> 
6BUTTON B<-> 
7+5V-->50 mA max
8GND--- 
9POT BX<-> 

Note: Direction is Computer relative Device.
Note: Pot is a linear 470 kOhm (�10 %)


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
9 pin D-SUB female connector diagram

9 pin D-SUB female connector
at the joystick cable

Pinouts.ru > Input devices (keyboards, mices, joysticks) pinouts >  Pinout of C64 Control port and layout of 9 pin D-SUB male connector and 9 pin D-SUB female connector
Document status: correct
Source(s) of this and additional information: Amiga 4000 User´s Guide from Commodore, Commodore 64 Programmer´s Reference Guide, from Hardware Book, Arwin Vosselman, Amiga 4000 User´s Guide from Commodore, Commodore 64 Programmer´s Reference Guide 2 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
8433 hits since March 4, 2005