PC 2 joysticks adapter pinout

connector or cable wiring scheme

15 pin D-SUB male connector
to the computer

	PC	Joy 1	Joy 2
+5 VDC	1	1	-
Button 1	2	2
Joystick 1 - X	3	3
Ground	4	4	4
Ground	5	5	5
Joystick 1 - Y	6	6
Button 2	7	7
+5 VDC	8	8
+5 VDC	9	9	1
Button 4	10	10	2
Joystick 2 - X	11	11	3
Ground	12	12
Joystick 2 - Y	13	13	6
Button 3	14	14	7
+5 VDC	15	15	8

Note: Since pin 12 is often used for MIDI-signals on gameport equipped soundcards it´s better to use the ground from pin 4 & 5, pin 15 is also used for MIDI-signals...

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

15 pin D-SUB female connector
to the Joystick 1 & 2

Pinouts.ru > Keyboard, Mouse and other input devices cables and adapters schemes > Pinout of PC 2 joysticks adapter and layout of 15 pin D-SUB male connector and 15 pin D-SUB female connector	Document status:	correct
Source(s) of this and additional information: Tomi Engdahl"s joystick page, from Hardware Book	2 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
11188 hits since March 4, 2005