Kenwood Head Unit Auxilliary Input (CA-C1AUX) pinout

audio or video connector or cable

UNKNOWN connector
at the 13 Pin Female Input

13 Pin Female Input Pin Name	13 Pin Female Input Pin Number	Direction	Input Source Pin Number	Input Source Pin Name	Description
Ground	6	<--	2	Shield	Right Audio Input
Right +	8	<--	1	Center	Common Audio Ground
Left +	12	<--	2	Center	Left Audio Input

On the head unit side, pin 9 is connected to pin 3 via a 10K Ohm resistor, this identifies the type of cable to the head unit.

2 pin RCA plug connector
at the Input Source

Pinouts.ru > Audio / Video hardware connectors pinouts listing > Pinout of Kenwood Head Unit Auxilliary Input (CA-C1AUX) and layout of connector and 2 pin RCA plug connector	Document status:	unknown
Source(s) of this and additional information: http://nodivisions.com/tech/	3 reports
Last updated at Mon Sep 4 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7040 hits since October 27, 2006