Handheld Buzzer For Buzz Pro2 from Edstrom Electronics pinout

audio or video connector or cable

Pin	Pin Name	Description
1	Data+
2	Data-

Here is the internal pinout for the Buzz Pro2 from Edstrom Electronics

Pin	Pin Name	Description
1	R1_DTA+	Red Indicator1 Data+
2	CLR+	Clear+
3	CLR-	Clear-
4	ACT_DTA+	Active Data+
5	EN_DTA-	Enable Data-
6	EN_DTA+	Enable Data+
7	GND	Ground (Connected with pin 9 on circuit board)
8	R2_DTA+	Red Indicator2 Data+
9	BZ+	Optional Buzzer+
10	BZ-	Optional Buzzer-

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > Audio / Video hardware connectors pinouts listing > Pinout of Handheld Buzzer For Buzz Pro2 from Edstrom Electronics and layout of 2 pin MONO plug connector	Document status:	correct
Contributor: Evan Edstrom	1 reports
Last updated at Tue Jun 19 2007. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
1514 hits since June 20, 2007