MIDI cable schematic pinout |
audio or video connector or cable |
5 pin DIN male connector |
Pin 2 should not be connected at both ends, the whole point of MIDI using opto-isolators is to avoid earth loops caused by having individual synths earthed at more than one point -- through the audio cable and again through the MIDI cable. For _cables_, pin 2 should be connected to the shiedling of the wire on both ends - the jacks on the instrument side deal with the connect / dont connect issue. The shell of the plugs, OTOH, should _not_ be connected to the shielding. | 5 pin DIN male connector | ||||||||||||
Pinouts.ru > Audio / Video hardware connectors pinouts listing > Pinout of MIDI cable schematic and layout of 5 pin DIN male connector and 5 pin DIN male connector |
correct | |
Source(s) of this and additional information: Hardware Book, www.harmony-central.com/MIDI/midi-cable.txt | 3 reports | |
Last updated at Wed Jul 25 2007. Submit additions or corrections for this document. | Is this document correct or incorrect? What is your opinion? |