Hardware pinouts information and cables schemes

SCSI External D-Sub (Future Domain) pinout

hard drive connector

bookmark this page

Seems to be available on some Future Domain SCSI-controllers only.



Pin Name Dir Description
1GND---Ground
2DB1<->Data Bus 1
3DB3<->Data Bus 3
4DB5<->Data Bus 5
5DB7<->Data Bus 7
6GND---Ground
7/SEL<->Select
8GND---Ground
9TMPWR<->Termination Power
10/RST<->Reset
11C/D-->Control/Data
12I/O-->Input/Output
13GND---Ground
14DB0<->Data Bus 0
15DB2<->Data Bus 2
16DB4<->Data Bus 4
17DB6<->Data Bus 6
18PARITY<->Data Parity
19GND---Ground
20/ATN<--Attention
21/MSG-->Message
22/ACK<--Acknowledge
23BSY<->Busy
24/REQ-->Request
25GND---Ground

Note: Direction is Device relative Bus (other Devices)


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > Hard drives connectors pinouts listing >  Pinout of SCSI External D-Sub (Future Domain) and layout of 25 pin D-SUB female connector and 25 pin D-SUB male connector
Document status: unknown
Source(s) of this and additional information: TheRef TechTalk, from Hardware Book 0 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
10505 hits since March 4, 2005