Hardware pinouts information and cables schemes

SCSI External D-Sub (PC/Amiga/Apple Macintosh) pinout

hard drive connector

bookmark this page



Pin Name Dir Description
1/REQ-->Request
2/MSG-->Message
3I/O-->Input/Output
4/RST<->Reset
5/ACK<--Acknowledge
6BSY<->Busy
7GND---Ground
8DB0<->Data Bus 0
9GND---Ground
10DB3<->Data Bus 3
11DB5<->Data Bus 5
12DB6<->Data Bus 6
13DB7<->Data Bus 7
14GND---Ground
15C/D-->Control/Data
16GND---Ground
17/ATN<--Attention
18GND---Ground
19/SEL<->Select
20PARITY<->Data Parity
21DB1<->Data Bus 1
22DB2<->Data Bus 2
23DB4<->Data Bus 4
24GND---Ground
25TMPWR<->Termination Power

Note: Direction is Device relative Bus (other Devices). Total length of all SCSI cables should not exceed 20 feet (6 meters).


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > Hard drives connectors pinouts listing >  Pinout of SCSI External D-Sub (PC/Amiga/Apple Macintosh) and layout of 25 pin D-SUB female connector and 25 pin D-SUB male connector
Document status: correct
Source(s) of this and additional information: Hardware Book 1 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
9847 hits since March 4, 2005