Hardware pinouts information and cables schemes

SNES2 video connector pinout

videogames connector

bookmark this page

Available on the newer models of Nintendo SNES



Pin Name Description
1RRed (Requires 200 uF in series)
2GGreen (Requires 200 uF in series)
3CSYNCComposite Sync
4BBlue (Requires 200 uF in series)
5GNDGround
6GNDGround
7n/cNot connected
8n/cNot connected
9CVBSComposite Video
10+5V+5 VDC
11L+RLeft+Right Audio (Mono)
12L-RLeft-Right Audio (Used to calculate Stereo)

Note: Pin 3 is SCART Switch voltage (+11 VDC) on PAL machines


This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).
Pinouts.ru > Videogames connectors pinouts listing >  Pinout of SNES2 video connector and layout of 12 pin SNES A/V male special connector and 12 pin SNES A/V female special connector
Document status: correct
Source(s) of this and additional information: Video Games FAQ (Part 3)Pinout from Radio Electronics April 1992SNES A/V Pinout at GamesX, from Hardware Book, Mark K 1 reports
Last updated at Sat Jun 25 2005. Submit additions or corrections for this document. Is this document correct or incorrect? What is your opinion?
[Discuss at the forum] [Back to index] [SUBMIT new pinout]
This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
7685 hits since March 4, 2005