NaviLock GPS connector pinout

GPS connector or cable wiring scheme

6 pin mini-DIN male (PS/2 STYLE) connector

Pin	Pin Name	Description
1	GND (black)	Ground signal for power and data
2	VCC +5V (red)	Power supply voltage to GPS +5V
3	Data TTL Rx (blue)	Data to GPS, TTL levels
4	Data RS-232 RX (white)	Data to GPS, RS-232 levels
5	Data RS-232 TX (green)	Data from GPS, RS-232 levels
6	Data TTL TX (yellow)	Data from GPS, TTL levels

NaviLock GPS cable pinout, 4800bps, no parity, no flow control

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > GPS receivers connectors pinouts listing > Pinout of NaviLock GPS connector and layout of 6 pin mini-DIN male (PS/2 STYLE) connector	Document status:	correct
Contributor: Jan Zahradnik	1 reports
Last updated at Tue Jun 26 2007. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
2363 hits since June 27, 2007