Magellan SportTrak (Map) Serial pinout

GPS connector or cable wiring scheme

Pin	Pin Name	Description
1	Rx	Recieve
2	GND	Ground
3	??	???
4	Tx	Transmit

This Magellan special connector is different than the one listed on this site. Rather than having the pins in a 'boxed' layout, they are actually lined up in a row. I labeled them so that pin #1 is at the far left when looking at the pins of the connector attached to the cable. Pin #3: Not Sure - Tested with Multimeter and could not find continuity between any pins from the Magellan to the DB9 connectors on my cable.

This information should be correct, but may be not. Please, help us to improve this document!
Is this document CORRECT or INCORRECT? Your opinion will be used to establish document status (showed at the bottom).

Pinouts.ru > GPS receivers connectors pinouts listing > Pinout of Magellan SportTrak (Map) Serial and layout of connector	Document status:	correct
	1 reports
Last updated at Wed Dec 6 2006. Submit additions or corrections for this document.	Is this document correct or incorrect? What is your opinion?

[Discuss at the forum] [Back to index] [SUBMIT new pinout]

This page contain parts under Copyright © 2000-2007 by pinouts.ru team.
No any portion of this webpage may be reproduced in any form without visible direct link to this page provided. Webmaster permission required in any other cases.
Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for their application.
4076 hits since November 20, 2006